Induction Forging and Forming

Forging and forming

Forging, hot stamping and extrusion consist of forming a part that has been previously heated to a temperature at which its resistance to deformation is weak. The approximate hot forming temperatures of the most commonly used industrial materials are:

  • Steel from 1100 to 1250 ºC.
  • Brass 750 ºC.
  • Aluminium 550ºC.

After heating up the material, the forming operation is done on different types of machines: mechanical impact presses, bending machines, hydraulic extrusion presses, etc.

The starting material used in forging is presented in the form of rounded studs, squares (billet) or bar materials.

Conventional furnaces (gas, fuel) are used to heat the parts but also induction can be used.

Induction forging and forming advantages

  • Material and energy saving plus flexibility.
  • Greater quality.
  • Process control.
  • Much shorter heating times.
  • Less oxidise and the production of scale is very low.
  • Easy and accurate adjustment of the temperature to be applied.
  • No time needed for the furnace pre and maintenance heating (for example after or during the weekend when it takes more time).
  • Automation and reduction of the labour required.
  • Heat can be directed to one specific point, which is highly important for parts with only one forming area.
  • Greater thermal efficiency.
  • Better working conditions as the only heat present in the air is that of the parts themselves.

Induction heating for forging

Other Heating Processes

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.